Buick 1990, Regal, Front and end sheet metal, heater, vehicle maintenance genuine OEM parts

Home
Buick
1990
Regal
Front and end sheet metal, heater, vehicle maintenance

Add this car in your garage and make future searches easy.

Clip, sheet metal front end

OEM part number: 20565201
Rocker panel molding (w57)

$?

Hinge, sheet metal front end

OEM part number: 20593990
Hood, right-hand (body side)

$?

Hinge, sheet metal front end

OEM part number: 20593991
Hood, left-hand (body side)

$?

Molding, sheet metal front end

OEM part number: 20603044
Hood rear reveal (w57) (except b85)

$?

Striker, sheet metal front end

OEM part number: 20604450
Hood primary latch w57

$0.49

Available in 1 shop

Clip, sheet metal front end

OEM part number: 20644898
Front fender side rear molding (bx4)

$?

Clip, sheet metal front end

OEM part number: 20650775
Hood support counterbalance

$?

Cable, sheet metal front end

OEM part number: 20650822
Hood primary latch release (1988) (pulley to latch) (approximately length 110")

$?

Cable, sheet metal front end

OEM part number: 20650823
Hood primary latch release (1988) (pulley to handle) (approximately length 2-1/8")

$?

Pinion, sheet metal front end

OEM part number: 20650854
Hood primary latch release cable handle pivot

$?

Spring, sheet metal front end

OEM part number: 20650857
Hood primary latch release cable handle

$?

Label, sheet metal front end

OEM part number: 20650862
Hood latch release

$?

Bracket, sheet metal front end

OEM part number: 20660172
Hood strut support

$?

Retainer, sheet metal front end

OEM part number: 20664092
Engine splash shield (push-in)

$0.30—0.79

Available in 3 shops

Molding, sheet metal front end

OEM part number: 20669720
Hood rear reveal (w57) (b85)

$?

Bolt, sheet metal front end

OEM part number: 20725768
Front fender wheel opening molding

$0.44—0.46

Available in 2 shops

Bolt, sheet metal front end

OEM part number: 20725768
Front fender lower rear finish panel (b97)

$0.44—0.46

Available in 2 shops

Bolt, sheet metal front end

OEM part number: 20725768
Front fender side rear molding

$0.44—0.46

Available in 2 shops

Bolt, sheet metal front end

OEM part number: 20725768
Fender lower rear panel (1990-91)

$0.44—0.46

Available in 2 shops

Screw, sheet metal front end

OEM part number: 20725768
Pan head with flat washer, m4.2x1.41x13, 8.15 outside diameter, abhl point, 6010m, #

$0.44—0.46

Available in 2 shops

Module, sheet metal front end

OEM part number: 88999177
Engine control (l27/3.8l)

$98.86—209.80

Available in 38 shops

Module, sheet metal front end

OEM part number: 88999195
Engine control (remanufactured) ((1988-90 lb6/2.8w) (1989-91 lh0/3.1t))

$98.86—236.44

Available in 38 shops

Conduit, sheet metal front end

OEM part number: 08919355
Electrical, 15 ft roll x 1/2 inside diameter

$?

Hose, sheet metal front end

OEM part number: 09438373
Fuel-oil evaporative 3/8"x24'

$?

Reservoir, sheet metal front end

OEM part number: 10060985
Coolant recovery (1988-89) (1990 w57 lh0/3.1t)

$0.80

Available in 1 shop

Reservoir, sheet metal front end

OEM part number: 10060985
Coolant recovery (1991 w19 lh0/3.1t)

$0.80

Available in 1 shop

Brace, sheet metal front end

OEM part number: 10102811
Front end sheet metal diag. (left-hand)

$0.82

Available in 1 shop

Brace, sheet metal front end

OEM part number: 10127870
Diag., right-hand

$?

Plug, sheet metal front end

OEM part number: 10128023
Front wheelhouse panel hole (1991)

$?

Bracket, sheet metal front end

OEM part number: 10130493
Engine lower front splash shield (1990-91 w57)

$1.13

Available in 1 shop

Retainer, sheet metal front end

OEM part number: 10136753
Front wheelhouse panel wiring (1991)

$?

Panel, sheet metal front end

OEM part number: 10145070
Radiator mount (upper) (1988 except k06)

$?

Cap, sheet metal front end

OEM part number: 10157701
Hood adjust front bumper

$0.89—1.66

Available in 3 shops

Insulator, sheet metal front end

OEM part number: 10192787
Radiator & condenser

$0.49

Available in 1 shop

Panel, sheet metal front end

OEM part number: 10192797
Radiator upper mounting (1988 k06) (1989-91)

$?

Insulator, sheet metal front end

OEM part number: 10192798

$?

Extension, sheet metal front end

OEM part number: 10204749
Front wheelhouse panel (right-hand)

$?

Extension, sheet metal front end

OEM part number: 10221064
Front wheelhouse panel (left-hand)

$3.33

Available in 1 shop

Reservoir, sheet metal front end

OEM part number: 10239078
Coolant recovery (1990-91) (l27)

$33.99

Available in 1 shop

Reservoir, sheet metal front end

OEM part number: 10239079
Coolant recovery (1991 w19 lh0/3.1t)

$1.85

Available in 1 shop

Reservoir, sheet metal front end

OEM part number: 10239079
Coolant recovery (1991 w57 lh0/3.1t)

$1.85

Available in 1 shop

Label, sheet metal front end

OEM part number: 10309116

$27.14—37.15

Available in 38 shops

Bumper, sheet metal front end

OEM part number: 10309494
Hood adjust front

$0.45—2.84

Available in 2 shops

Nut, sheet metal front end

OEM part number: 11504614
Hexagon with conical washer, m5x0.8, 5.3thk, 19 outside diameter, 9, por, gm510m

$3.15—6.06

Available in 38 shops

Screw, sheet metal front end

OEM part number: 11505209
M6x1x30

$2.76—4.78

Available in 38 shops

Nut, sheet metal front end

OEM part number: 11505865
Hexagon, stamped, with slr, m6x1, 24 outside diameter, zinc

$1.03—2.88

Available in 38 shops

Bolt, sheet metal front end

OEM part number: 11508256
Hex flanged head, self-tappet, m4.2x1.4x13, 11.6thd, 8.5 outside diameter, gm6010m, por

$0.45—0.51

Available in 38 shops

Screw, sheet metal front end

OEM part number: 11509189
Hwh, self tappet, m8x2.12x20, 17.2 outside diameter, 6010m, piece

$2.89—3.05

Available in 2 shops

Screw, sheet metal front end

OEM part number: 11515358
Hexagon with flat washer, tappet, m8x1.25x20, 17 outside diameter, steel, po

$0.96—1.01

Available in 2 shops

Bolt, sheet metal front end

OEM part number: 11516700
Hexagon, with conical washer, m8x1.25x55, 36thd, 24 outside diameter, alternating current point, 9.8, 7114m

$3.09—4.35

Available in 38 shops

Horn, sheet metal front end

OEM part number: 12368063
High a note (a)

$23.84—42.48

Available in 3 shops

Horn, sheet metal front end

OEM part number: 12368064
Low f note (f)

$39.31—41.89

Available in 2 shops

Relay, sheet metal front end

OEM part number: 13502674
Horn (1988-89)

$8.36—30.53

Available in 39 shops

Retainer, sheet metal front end

OEM part number: 14005061
Battery hold down

$0.38—2.79

Available in 2 shops

14056624 genuine OEM part.

Tank, sheet metal front end

OEM part number: 14056624
Heater & air conditioning control vacuum

$17.72—32.07

Available in 38 shops

Insulator, sheet metal front end

OEM part number: 14088018

$18.51

Available in 1 shop

Relay, sheet metal front end

OEM part number: 14089936
Horn (1990-91)

$14.18—27.08

Available in 38 shops

Bracket, sheet metal front end

OEM part number: 14100494

$?

Nut, sheet metal front end

OEM part number: 15650655
Unit, m4.2x1.4, .65-3.8 panel thick, pz

$0.56—0.59

Available in 2 shops

Strap, sheet metal front end

OEM part number: 19130464
Tie 0.38" width, bundle diameter 1/16"-1-3/4", 8.27" length, nylon 6/6 fits 0.

$0.75—0.80

Available in 2 shops

Screw, sheet metal front end

OEM part number: 22536997
Hwh, m4.2x1.41x20, 9.2od, 13.8 thread

$?

Servo, sheet metal front end

OEM part number: 25074627

$228.54

Available in 1 shop

Clamp, sheet metal front end

OEM part number: 25518880
Hexagon head, worm gear, .250-.625, .320 wide, stainless steel

$1.73—2.10

Available in 38 shops

Bracket, sheet metal front end

OEM part number: 52362084
Engine lower front splash shield (1991 w19)

$?

Shield, sheet metal front end

OEM part number: 52365364
Engine lower front splash (1990-91)

$?

Condenser, sheet metal front end

OEM part number: 52451530
Air conditioning (1988)

$132.32—148.88

Available in 2 shops

Condenser, sheet metal front end

OEM part number: 52452050
Air conditioning (1989-91)

$165.51

Available in 1 shop

Radiator (code weight) (1988-89), sheet metal front end

OEM part number: 52457457

$173.79

Available in 1 shop

Radiator, sheet metal front end

OEM part number: 52498583
(code s3) (1990-91)

$257.50—277.07

Available in 2 shops

← Prev.	1 2 3	Next →
Page 3 of 3

Copyright © 2012-2024, http://oemcats.com.
Feel free to contact us if you have any questions: info@oemcats.com.

Follow us on Facebook - Submit a new shop - Terms and conditions

This site is not owned or operated by General Motors Company.
The trade marks appearing on this website including, but not limited to: GM, Buick, Cadillac, Chevrolet, GMC, Oldsmobile, Opel, Pontiac, Saturn, Vauxhall and their respective logos, emblems, slogans and vehicle model names and body designs are trademarks and/or service marks of General Motors Company, its subsidiaries, affiliates or licensors.
This site is intended for reference only.